Berber Roll Goods Inlay
- Durable – Heavy 52-ounce solution-dyed fabric is stain resistant and has excellent light fastness; tough enough for outdoor use
- Attractive – Loop pile “berber” construction features a hobnail design for an upscale look
- Safe – High-performance rubber backing helps hold the mat in place to minimize slipping hazards
- Easy to Clean – Polypropylene fabric (52 ounces/square yard) is naturally resistant to staining and fading
- 17 colors to choose from
- 3/8″ thick and available in custom sizes from 3′ x 12′ to 12′ X 50′
- Designed to be installed like carpeting or loose laid like a mat; available with singed borders or vinyl nosing (sold separately)
Recommended Uses
Recommended for use in large commercial entryways, especially in the retail and hospitality industries. The tight weave of Berber makes it resistant to damage from golf shoes and ideal for use in clubs and other locations where spiked footwear may be worn by guests or employees.
Cleaning Instructions
Berber Roll Goods mats should be vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications). They can also be cleaned with an extractor or hosed off as necessary to remove heavy soil. Hang dry and always make sure they are dry before placing them back in service.
Installation Instructions
Measure
Determine the number of square feet that you will need. Measure the length and width of the area you wish to cover. Multiply the width by the length to get the square footage of the space. For areas that are not rectangular, break the area into smaller rectangles. Multiply the width times the length for each of the smaller rectangles separately and add up all the results to arrive at the overall square footage.
Prepare
Remove any old floor coverings, debris, and adhesives from the floor. Clean the entire floor surface of any dust, drywall mud, etc. Once the floor has been cleaned, allow it to dry completely. Allow the matting material to sit in the area uninstalled for several hours so it can acclimate to room temperature prior to installation.
Install
Apply your adhesive to the prepared floor according to the adhesive manufacturer’s directions. We recommend CA024 multi-purpose solvent-free adhesive for all installations both indoor and outdoor. Never use an adhesive that contains solvents. Similar to laying carpet, roll the matting out over the installation area (paying careful attention to the location and orientation of your logo). Carefully trim the excess material around the perimeter using a utility knife.
Place an Order
Customers will have to e mail us for further details in order to place an order
